Opening Lists With The Message Key - Siemens Gigaset S685 IP Manual

Opening lists with the message key

You can use the message key f to open the following lists:
u
Answering machine list
u
Network mailbox,
A separate list is displayed for each network mailbox.
Precondition: Its number is saved in the base station, it is switched on
£
( Page
number is assigned to the handset as a receive number.
u
SMS list,
If several mailboxes are set up (
if required.
u
E-mail inbox,
This is only shown if new messages have arrived in the mailbox from the
incoming e-mail server.
u
Calls list
u
Messenger message list,
The list is only shown on the handset that is online.
An advisory tone sounds as soon as a new message arrives in a list. The f
key flashes (it stops when the key is pressed). In idle status, the display shows
an icon for the new message:
Icon
Ã
Á
À
The number of new entries is shown beneath the corresponding icon.
List selection
Pressing the f key will only display lists that contain messages and also the
network mailbox lists
Lists with new messages are shown first and identified in bold. The number of
messages received are shown in brackets.
If a list contains no new messages, the number of old messages will be shown.
Exception: (0) is displayed for
£
Page 123
123, Page 200) and the corresponding VoIP/fixed line network
£
Page 84
£
Page 93
£
Page 103
New message...
... in one of your network mailboxes or
... in the answering machine list
... in the calls list
... in the SMS, messenger or e-mail list
Net AM ....
Net AM ...
£
Page 88), several lists will be displayed,
network mailboxes.
Using lists
67