Buttons; Opening Web Pages - Siemens Gigaset S685 IP Manual

Web configurator – setting the phone using a PC
Applying changes
As soon as you have made your change on a page, activate the new setting on
the phone by selecting Set.
If your input in a field does not comply with the rules for this field, an appropri-
ate error message will be displayed. You can then repeat the input.
Warning
Changes that have not been saved on your phone are lost if you move to
another Web page or if the Web configurator is logged off, e.g. due to exceed-
ing the time limit (

Buttons

Buttons are displayed in the bottom section of the working area.
Save entries on the phone.
Set
Reject changes made on the Web page and reload the settings that are cur-
Cancel
rently saved in your phone to the Web page.

Opening Web pages

A brief outline of the navigation to the individual Web configurator functions is
given below.
Example
Setting DTMF signalling
Settings
To open the Web page, carry out the following steps after registration:
¤
Select the
¤
Select the
The Telephony
¤
Select the
The Web page from Figure 1 will be shown in the Web browser.
172
£
Page 168).
¢ ¢
Telephony Advanced Settings
menu in the menu bar.
Settings
Telephony function in the navigation area.
subfunctions are displayed in the navigation tree.
Advanced Settings subfunction.