Configuring Call Forwarding Via Voip - Siemens Gigaset S685 IP Manual

Web configurator – setting the phone using a PC

Configuring call forwarding via VoIP

If you are swapping calls via VoIP connections, you can connect the two exter-
nal callers (provider-dependent). You can configure settings for this type of call
forwarding.
¤
Open the following Web page:
Area: Call Transfer
¤
Make your settings for call forwarding via VoIP in the following fields:
Use the R key to initiate call transfer with the SIP Refer method.
If you activate the
between will be connected when you press the end call key S. Your connec-
tions with the callers will be terminated.
Transfer Call by On-Hook
If you select Yes, the external parties you are swapping between will be con-
nected when you press the end call key a. Your connections with the callers
will be terminated.
Preferred Refer To
Define the protocol (the contents of the "Refer To" information) that should be
used with preference when forwarding calls:
Target's contact info
This protocol is recommended for "closed" networks (internal company and
business networks).
Original URL
This protocol is recommended when the base station is connected to the
Internet via a router with NAT.
Automatic Refer To
If you select Yes, the base station will automatically attempt to determine the
best protocol.
If the base station cannot determine the best protocol, it will use the protocol
defined in
¤
Now select
Please note
For information on how to forward a call when you deactivate both
key to initiate call transfer with the SIP Refer method.
£
Page
202
option, the two external parties you are swapping
Yes
Preferred Refer To.
Set to save your settings.
65.
¢
Settings Telephony
and
Transfer Call by
¢
Advanced Settings.
Use the R
On-Hook,