Saving Messenger Access Data - Siemens Gigaset S685 IP Manual

Web configurator – setting the phone using a PC
The default port number for voice transmission is 5004.
Use random ports
Enter the port number range from which the SIP port is to be selected.
SIP port
Specify the lowest port number in the left-hand field and the highest number
in the right-hand field (number between 1024 and 49152).
This port number range must not overlap the range specified for
The default range is 5060 to 5076.
Specify a range of port numbers from which the RTP ports are to be selected.
RTP port
Specify the lowest port number in the range in the left-hand field and the high-
est number in the right-hand field.
The default range is 5004 to 5020.
¤
Now select

Saving messenger access data

The messenger client in your base station enables instant messaging (imme-
diate message transfer, chatting). The phone supports the XMPP messenger
(Jabber).
In order for you to use your phone's messenger to "go online" and "chat" on the
Internet, the access data of a messenger server must be saved on your phone.
Your phone is already registered with the Gigaset.net Jabber server. An account
has been assigned to your phone. You can chat to other Gigaset.net subscribers
via this account. To do this you need to create a buddy list on the PC
£
( "Setting up a Gigaset.net Jabber
You can also register with another instant messaging provider that supports
XMPP Messenger (Jabber). You must then save the messenger server address
and your access data on your phone.
You can define a
if you are logged in (online) with the messenger server with several devices
(phone, desktop PC and laptop) at the same time using the same Jabber
The
Resource
cannot log in to the messenger server if it does not have a resource name.
You should assign a
each Jabber ID. The
sage.
Example
You are online using one of your phone's handsets and your PC both at the
same time. You have assigned your phone
and your PC
addressed to your Jabber ID will be sent to your phone.
¤
Open the following Web page:
204
= Yes
Set to save your settings.
Resource name and a
name is used to distinguish between these devices. The phone
as each message will only be sent to one device for
Priority
Priority determines which of the devices receives the mes-
(Resource name "PC") priority 10. In this case, any message
account" on Page
Priority for your phone. Both are required
(Resource
¢
Settings Messaging
RTP port.
205).
ID.
name "phone")
Priority 5
¢
Messenger.