De-Registering Handsets - Siemens Gigaset S685 IP Manual

The handset is assigned the lowest available internal number (1-6). If a number
of handsets are registered on the base station, the internal number appears in
the display after registration, e.g.
was assigned to the handset.
Please note
If six handsets are already registered to the base station, there are two options:
u
The handset with the internal number 6 is in idle status: the handset you
wish to register is assigned the number 6. The handset that was previously
number 6 is de-registered.
u
The handset with the internal number 6 is being used: the handset you
wish to register cannot be registered.
Registering other handsets on the Gigaset S685 IP
You can register other Gigaset handsets and handsets for other devices with
GAP functionality as follows.
¤
Start the registration procedure on the handset in accordance with the
handset's operating instructions.
¤
Press and hold (for approx. 3 seconds) the registration/paging key
£
( Page
Please note
You can also make changes on the base station with a Gigaset S45 or
C47H handset.

De-registering handsets

You can de-register any registered handset from any registered Gigaset S68H
handset.
u
q
§Options§
De-reg. H/Set No.
~
§Yes§
a
The handset is de-registered immediately, even if it is not in idle status.
2) on the base station.
Open list of internal participants.
The handset you are currently using is highlighted with <
Select the handset to be de-registered.
Press the display key.
Select and press
§OK§
Enter the base station system PIN (default setting: 0000).
Press the display key to confirm the prompt.
Press and hold (idle status).
INT 2. This means that the internal number 2
.
Using several handsets
133