Eco Dect: Reducing The Power Consumption And Transmission Power Of The Base Station - Siemens Gigaset S685 IP Manual

ECO DECT: reducing the power consumption and transmission power of the base station

ECO DECT: reducing the power consumption and
transmission power of the base station
The base station of your phone is an ECO DECT base station, this means that:
u
The base station uses less power because it is equipped with a power-saving
mains adaptor.
u
The reduction of the handset's transmission power is dependent on the
handset's proximity to the base station.
u
The base station can also be switched to
transmission power and the power consumption of the base station further.
Eco Mode
80% reduction of the transmission power in standby operation and when
making calls.
are close together, e.g. when the phone is being used in an office.
The setting can be made on the handset.
Activating/deactivating Eco Mode
Precondition: Repeater support must be deactivated.
¢
v Ð
Eco Mode
If Eco mode is activated, the ½ icon is displayed on the idle display (header).
The signal strength icon in the header of the idle display indicates whether the
handset is connected to the base station.
Ð i Ñ Ò
| (flashes)
Please note
u
Activating
u
Eco Mode
i.e. both functions cannot be used at the same time.
means:
is available when the handset(s) and the base station
Eco Mode
¢ ¢
Base Add. Features
Select and press
§OK§
– reception good to poor
– no reception
reduces the range of the base station.
Eco Mode
and any repeater support (
Mode. Eco mode reduces the
Eco
‰
( = on).
£
Page 157) cancel each other out,
127