Siemens Gigaset S685 IP Manual page 190

Web configurator – setting the phone using a PC
Area: Settings for Bandwidth
The settings in this area influence all VoIP connections (VoIP phone numbers).
Allow 1 VoIP call only
You can usually make two VoIP calls at the same time on your phone. If, how-
ever, your DSL connection has a narrow bandwidth, there may be problems if
two VoIP calls are made at the same time. The data is no longer transferred
properly (long voice delay, data losses etc.).
¤
Select
phone connections being established.
¤
If you wish to permit two VoIP connections, select No.
Please note
If only one VoIP connection is permitted, the following VoIP network services
will no longer be available:
u
Call waiting
Call waiting is not displayed during a call via VoIP.
u
External consultation call from a VoIP call
u
Call swapping and initiating a conference call via VoIP
Voice Quality
Default settings for the codecs used are stored in your phone: one setting opti-
mised for narrow and one for wide bandwidths.
¤
Activate one of the options
bandwidth
settings are shown in the
changed.
¤
Activate the
tion-specific voice codecs yourself (see
188
Yes after Allow 1 VoIP call only
if you wish to accept a default setting for all VoIP connections. The
Settings for Connections
Own Codec preference
to prevent any further parallel VoIP
Optimized for low bandwidth
option if you wish to select and set connec-
"Area: Settings for
/ Optimized for high
area and cannot be
Connections").