Logging In, Setting The Web Configurator Language - Siemens Gigaset S685 IP Manual

Web configurator – setting the phone using a PC
Please note
The connection between the PC and the Web configurator is a local connec-
tion (LAN connection). The Internet is only accessed to establish the connec-
tion.

Logging in, setting the Web configurator language

Once you have successfully established the connection, the
will be displayed in the Web browser.
You can select the language you want the menus and Web configurator dia-
logues to be displayed in. The language that is currently selected is displayed in
the top field of the Web page.
¤
If necessary, click
¤
Select the language.
¤
Enter your phone's system PIN (default setting: 0000) in the bottom field of
the Web page, to access the Web configurator functions.
¤
Select OK.
Once you have successfully logged in, a
mation on the Web configurator.
If you enter an incorrect system PIN, a corresponding message will be dis-
played. You will be prompted to re-enter the PIN.
If you enter an incorrect system PIN a second time, the PIN field will be blocked
for a short time (greyed out). The duration of the block will double each time a
PIN is subsequently entered incorrectly.
Please note
u
If you have forgotten your system PIN, you must restore your device's fac-
tory settings. Please note that this will restore all other settings too
£
( Page
u
If you do not make any entries for a prolonged period (approx. 10 minutes),
you are automatically logged off. The next time you try to add an entry or
open a Web page, the
PIN again to log in again.
u
Any entries that you did not save on the phone before automatic log-off will
be lost.
168
to open the list of available languages.
156).
Login Web page will be displayed. Enter the system
screen opens with general infor-
Home
Login Web page