Registration For Personalised Info Services - Siemens Gigaset S685 IP Manual

Messages when loading requested information
The information is loaded from the Internet. Wait a few seconds until the infor-
mation is displayed. The display shows
If the information for an info service cannot be displayed, one of the following
messages appears:
Requested page can't be reached.
Possible causes of this are:
u
Time limit exceeded (timeout) when loading the information, or
u
the Internet server for the info services cannot be accessed.
¤
Check your Internet connection and repeat the request at a later time.
Coding error on requested page
The content of the requested info service is coded in a format which the hand-
set cannot display.
Can't display requested page
General error when loading the info service.
Login failed.
Registration has failed. Possible causes of this are:
u
You have not entered your registration data correctly.
¤
Reselect the info service and repeat the registration process.
Please remember that data is case sensitive.
u
You are not entitled to access this info service.

Registration for personalised info services

If a special registration with user name and password is required to access an
info service, the following is displayed after the service has been called up:
Login
Username:
Password:
Ý
Username
Password
§Save§
If registration was successful, the requested info service is displayed.
If registration failed, a message to this effect appears on the display
£
Messages when loading requested
Save
Enter the user name supplied by the provider of the info service.
Enter the password associated with this user name.
Press the display key to send the registration data.
Info Center – with the handset always online
Please wait.
information, Page 109.
109