Table of Contents
Advertisement
B
E
N
ANGLE THE PUSH
HANDLE
The push handle on the Multi Frame can easily
be adjusted for angle/height.
1) Push the buttons (A) in both sides and hold
them in
2) Move the push handle up or down to obtain
the desired position.
3) Release the the buttons (A) and the push
A
handle will stay in the desired position.
Do not ever use the push handle to lift/pull
the chair up or down stairs, landings,steps
etc. The chair can only be lifted by two
persons lifting the frame evenly. Never use
the push brace to lift the chair.
Be careful not to get fingers caught when
adjusting the push handle.
ANTI-TIP DEVICE
Anti-tips are standard equipment on the Multi
Frame. The anti-tip devices are mounted on the
back of the chair beneath the seat.
Activate the anti-tip device with the foot on the
projection (A). To deactivate, push projection
again and turn the anti-tip device around 180°.
The anti-tip device must be activated when
the angle of the basic frame (B) is greater
than 20° or when using tilt.
We recommend periodically checking the
anti-tip devices to make sure they are in
proper working condition.
Always make sure the anti-tip devices are
secured in activated or deactivated position
Deactivate the anti tips when forcing kerbs
higher than 100mm
A
6
Advertisement
Table of Contents
