Table of Contents
Advertisement
E
N
A
WHEEL LOCK 12½" AND
22" WHEEL
Wheel locks are mounted on the frame and
can be operated by either user or helper.
Activate the wheel lock:
Push the handles (A) on both sides down, to
lock the wheels.
Deactivate the wheel lock:
Pull the handles (A) on both sides up, to lock
the wheels.
The wheel locks are installed on the frame and
can be moved forward and backward, depending
on wheel size and brake efficiency. Move the
fittings backward and the chair will be locked
more. Move the fittings forward and the chair
will locked less efficiently.
Loosen the screws (B) with the enclosed 4 mm
Allen key to adjust the placement of the wheel
lock. Fasten the screws in the desired position.
Always activate the wheel locks in both
sides.
Check at regular basis that the lock clicks
into place and the holes are not filled with
grease and dirt.
Keep the recommended air pressure, 55
PSI/3,8 bar/380 kPa in the rear wheels, to
make sure the brakes work properly.
To ensure the safety of the user, we strongly
recommend distance of 8-10 mm, between
the wheel and the wheel lock block.
Warning - Entrapment hazard. Be careful
not to squeeze fingers between the handle
and the frame
Before storage: Always deactivate wheel
locks/brakes
B
12
01
01
01
Advertisement
Table of Contents
