Angling / Tilting The Basic Frame - R82 multi frame Series User Manual

A
E
N
1 2 3
ANGLING / TILTING THE
BASIC FRAME
The basic frame (A) can be adjusted for angle.
The basic frame can be tilted backwards by
B
operating the lever (B) and using the push brace
to position the tilt in the required position, once
the required position is reached the Lever (B)
can be released.
To tilt the frame forward back to the horizontal
position, depress the lever(B) whilst holding
onto the push brace and allow to return to the
horizontal position, the frame may be stopped
in any position in between the min. and max.
position by releasing the lever (B)
When angling the basic frame the centre
of gravity changes! When positioning the
seat for the first time, it can be necessary
to adjust the seat forward or backward to
maintain stability and prevent the frame
from tipping.
When angling the basic frame, please be
aware that the push brace also might to
be angled.
Activate the anti-tip devices when the seat
is in tilted position.
The angle of the basic frame depends on the
placement of the basic frame on the Multi Frame.
The basic frame can be mounted in 3 different
positions to adjust the centre of gravity for a seat.
Angle for position 1: 0° to approx 40°
Angle for position 2: 0° to approx 35°
Angle for position 3: 0° to approx 30°
8