Related Manuals for R82 back in a box
Summary of Contents for R82 back in a box
- Page 1 English user manual © 2005 R82 A/S. All rights reserved. The R82 logo, Back in a box and Seat in a box are registered trademarks of R82 A/S. 05.2011...
-
Page 2: Table Of Contents
CONTENTS Safety ................4 Warranty ................4 Tools .................. 4 Maintenance ..............4 Getting started with the cushion system ......5 Back cushion ..............6 Seat cushion ..............7 Liners ................. 8 Top cushions..............9 Covers ................10 Washing instructions ............11 Measurements .............. - Page 3 The R82 cushion system has been developed in close collaboration with physi- otherapists and ergotherapists to obtain optimum sitting comfort and flexibility. We are convinced that the R82 cushion system will meet demands for correct sitting posture and comfort in modern aids for children.
-
Page 4: Safety
R82 homepage/download. The warranty can only be sustained if the R82 product is in use in the same country where it was purchased and if the product can be identified by the serial number. -
Page 5: Getting Started With The Cushion System
GETTING STARTED WITH THE CUSHION SYSTEM Cushions, liners and covers are delivered in the same box. The box also contains a ruler, a Stanley knife and these instructions. Cushions and liners should be adjusted and cut roughly. The cushions should now be tested be- fore final cutting and the cover can be put on. -
Page 6: Back Cushion
BACK CUSHION The base plate (A) can be extended with diffe- rent liners to exactly fit the user’s needs. It may be necessary to cut the base plate so it can be placed in the chair. Base plate with lumbar support (B) and side liners (C). -
Page 7: Seat Cushion
SEAT CUSHION The base plate (A) can be extended with diffe- rent liners to exactly fit the user’s needs. It may be necessary to cut the base plate so it can be placed in the chair. Base plate med abduction liner (B), liners at the front and the sides (C) and foam pillow (D). - Page 8 LINERS The seat and back base plates can be extended with a variety of liners and cushions which can all be cut and fitted according to needs. Back: A) Side liner B) Back liner C) Lumbar support D) Cushion, T-foam Seat: E) Side liner, large F) Side liners, small...
-
Page 9: Liners
TOP CUSHIONS Once the liners have been mounted on the base plate the top cushions should be fitted. A) Back top cushion B) Seat top cushion All cushions are fitted with Velcro tape on the back so they adhere to the base plate and the liners. -
Page 10: Covers
COVERS Covers should be drawn over the cushions and liners and fastened at the back using the Velcro strips. Covers are flexible in size and may therefore be fitted over various sizes of liner assemblies. -
Page 11: Washing Instructions
WASHING INSTRUCTIONS Covers can be removed and machine washed in accordance with washing instructions. Covers should not be bleached or ironed and should be drip dried, i.e. hung up wet MADE IN DENMARK... -
Page 12: Measurements
Abduction block (I), H x W x D 7x10x12 7x10x12 7x10x12 7x10x12 Seat cushion cover (J), D x W 38x30 43x43 47x38 47x42 PRODUCER TECHNICAL DATA R82 A/S Cushions: Fire-resistant foam Parallelvej 3 8751 Gedved Covers: Fire-resistant fabric Danmark DISTRIBUTOR Please find your distributor on www.r82.com...
Need help?
Do you have a question about the back in a box and is the answer not in the manual?
Questions and answers