Centre Of Gravity - R82 multi frame Series User Manual

E
N
A

CENTRE OF GRAVITY

The center of gravity for the Multi Frame can be
adjusted by moving the placement of the basic
frame and by changing the position of an interface.
The basic frame can be placed in 3 positions:
Changing the placement of the basic frame:
1) Dismount the fitting (A) below the basic frame
by removing (from below) the 2 bolts with a 4
mm allen key. Remove the fitting on both sides.
2) Lift the basic frame and move it forward or
backward to the desired position.
3) Mount the bolts again.
Changing the placement of a interface:
Please see section "Interface for x:panda and
Panda Futura seats".
It is very important to adjust the centre of
gravity, to maintain stability and prevent the
frame from tipping.
We recommend that the seat placement
adjustment is made by a skilled technician.
It is important to tighten all screws securely
and inspect them regularly, especially after
adjustment of the centre of gravity.
If the center of gravity is adjusted towards
the rear of the chair, the chair may become
tippy. We recommend activating the anti-
tips.
10