Push Brace For Indoor Frame; Push Brace For Outdoor Frame; Adjusting The "Wombat" Foot Plate - R82 High-low indoor Manual

PUSH BRACE FOR
INDOOR FRAME
Depth adjustment: Loosen the screws (A) at both
sides of the frame and depth adjust the push
brace. The push brace adjusts in two depths and
clicks into place with the security pin.
Fasten in the desired position.
Warning 05
Squeezing Hazard between seat and push-
brace when adjusting seat angle.
Prohibition: Incorrect lifting points, especially
on stairs
PUSH BRACE FOR
OUTDOOR FRAME
Height adjustment: Loosen the handles (A) and
push in the locking pin (B).
ADJUSTING THE
"WOMBAT" FOOT PLATE
Angle adjustment - foot plate bar:
Loosen the handle (A).
Angle adjustment - foot plate:
Turn the fingerscrew to the right to adjust up-
wards and to the left to adjust downwards (A).
Height adjustment - foot plate:
Loosen the handle (B) using a 6 mm Allen key.
Do not use the footrest as a step.
Warning 01 Entrapment hazard: When the
foot support(s) is in the lowest position the
castors can reach it when turning.
Warning 05 Squeezing hazard between
frame and footplate when adjusting the
angle of the foot support bar C
B
11
A
A
B
A
C
E
N