Mounting The Push Brace; Adjustment Of The Push Brace - R82 Cougar 80196 User Manual

A
GB
Follow the instructions below to mount the push
A brace.
1) Remove the ferrules (A) at the top of the
B
2) Push the push brace into the slides, and
3) Mount the ferrules (A) again.
GB
The angle of the push handle is easy to adjust so
that it can be used by carers of different heights.
MOUNTING THE
PUSH BRACE
frame.
tighten the 2 screws (B) in each side.
The top screw is fitted to the mark in the
slide to secure that the push brace can not
be pulled up when in use.
ADJUSTMENT OF
THE PUSH BRACE
Do not pull/lift the chair with the push
handle, especially on stairs.
13
G
B