Programming For Ecp Communicator - Honeywell VISTA-128BPEN Installation And Setup Manual

Vista-128BPEN Installation and Setup Guide

Programming for ECP Communicator

•
Program the Communicator in Device
Programming in the #93 Menu Mode Programming.
• Field ✳56: Selects the time the panel should wait
before it attempts to send a message to the second
destination.
4-10
• Field ✳57: Select the initial reporting destination
for messages.
• Field ✳58: Select events for the primary sub's ID
• Field ✳59: Select events for the secondary sub's ID.