Honeywell VISTA-128BPEN Installation And Setup Manual page 54

Vista-128BPEN Installation and Setup Guide
2. In Table 2, enter devices used on Auxiliary Power. Calculate standby and alarm currents, then add to get Auxiliary
Power current subtotal.
Table 2: Auxiliary Power Current Load
Device Device Current X
Model # # of Units
Auxiliary Power Subtotal
(terminals 6 & 7 – 750mA max.)
3. In Table 3, enter devices connected to the Alarm Output. Calculate alarm currents, then add to get the Alarm
Output current subtotal.
Table 3: Alarm Output Current Load
Device Device Current X
Model # # of Units
Alarm Output Subtotal
(terminals 4 & 5 – 1.7A max.)
3-34
Total Current
Standby Alarm
Total Current
Standby Alarm
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX
XXXXXX