Encoder With Biss Digital (X1) - Kollmorgen S700 Series Instruction Manual

S748-772 Instructions Manual | 9 Electrical Installation

9.12.5 Encoder with BiSS digital (X1)

Wiring of a single-turn or multi-turn digital encoder with BiSS interface as a feedback system
(primary and secondary, (➜ # 74)).
The thermal control in the motor is connected via the encoder cable to X1 and evaluated
there. All signals are connected using our pre-assembled encoder connection cable. If cable
lengths of more than 50 m are planned, please consult our customer service.
Frequency limit: 1,5MHz
Type
5V digital (BiSS B)
12V digital (BiSS B)
5V digital (BiSS C, Renishaw)
The pin assignment shown on the motor side relates to the AKM motors.
80 Kollmorgen | kdn.kollmorgen.com | July 2019
FBTYPE EXTPOS
20 11
22 11
33 12
GEARMODE Up
11 5V +/-5%
11 7,5...11V
12 5V +/-5%