Procedure To Open The Front Hood; Front Bonnet Opening; Opening The Side Cover - Zetor UTILIX HT Series Operator's Manual

MAINTENANCE INSTRUCTIONS

Procedure to open the front hood

Front bonnet opening

To open the hood:
Unlock the hood by pulling the handle (1) in the direction
of the arrow (forward).
The handle is located under the right front corner of the
hood.
Grasp the hood and lift it.
In the raised position, the hood is locked by the gas-liquid
safety stops.
To close the hood:
Check that the handle (1) has returned to the rear
position.
Pull the hood down and snap it down until the hood lock
UCL18NN011
engages.
When the front hood is slammed shut, the headlight bulbs located in the front hood may be
damaged.

Opening the side cover

1 - Support Pin (1)
To open it, grasp the side panel of the hood and pull the
front panel upward to separate it from the guiding support
pin (1). Then pull the hood side panel forward.
UCL18N061
95