Operating The Hydraulics; Position Control - Zetor UTILIX HT Series Operator's Manual

Operating the hydraulics

The hydraulics are powered with an engine driven hydraulic pump and controlled with a position control lever
mounted beside the driver.
Danger: When working with the three-point hitch, it is necessary to stay away from the radius
of lift arms and all connected equipment. This eliminates the risk of injury in case of improper
handling.

Position control

1 - Position Regulation Lever
The implements can be raised and lowered using the
position regulation lever and can be stopped at any
position by stopping the lever shift.
To ensure a constant working depth, an adjustable stop
can be used to ensure that the implement always returns
to the same depth.
To raise the implements: Pull the lever backwards
To lower the implement: Push the lever forwards.
Warning: After finishing the work, always lower the implement to the ground and switch off the
engine, set the parking brake to avoid injuries and accidents.
Internal hydraulic circuit control lever
1 - Draft Control Lever
2 - Floating position
3 - Draft Control Range
4 - Lifting
For precise work, the soil tillage implement can be
adjusted using draft control. When the lever is moved
forward, the depth increases. When the lever is pulled
back, the depth decreases.
CONTROLS, INSTRUMENTS & OPERATIONS
U18N033
U18N034
63