Engine Oil - Zetor UTILIX HT Series Operator's Manual

MAINTENANCE INSTRUCTIONS

Engine oil

1 - Minimum Level Mark
2 - Maximum Level Mark
3 - Engine Oil Dipstick
Remove the dipstick, wipe it and immerse in the oil pan.
Make sure the oil level is between the upper and lower
mark, near the upper mark. If the oil level is too low, add
more oil. Never exceed the replacement interval.
Always check the oil before starting the engine or at least
after 30 minutes after stopping the machine. Never check
the oil level when the engine is running or immediately
after it has been stopped.
UCL18N056
1 - Engine oil filter
2 - Engine Oil Dipstick
U18N059
Important: Do not overfill the crankcase with oil.
86