Hydraulic Lock Of The Front Three-Point Hitch - Zetor UTILIX HT Series Operator's Manual

Hydraulic lock of the front three-point hitch

Hydraulic locking of the front three-point hitch is performed in any position of the hydraulic cylinders by two
valves located on the right side of the tractor under the cab, in the area of the right footrest (A).
To close the valves (lock the movement of the arms), move the lever to the position shown in figure (B).
To open the valves (unlock the movement of the arms), move the lever to the position shown in figure (C).
The locking or unlocking of the arm movement must always be performed on both valves. It is
forbidden to have one valve open and the other closed during the operation of the tractor.
If the front three-point hitch is not used, both valves must be closed.
When transporting mounted implements, always lock the hitch in the raised position
hydraulically, with valves located on the right side of the tractor under the cab.
This hydraulic lock is recommended even if no equipment is connected to the three-point hitch.
CONTROLS, INSTRUMENTS & OPERATIONS
UCL18NN004
71