Working And Transport Position Of The Front Three-Point Hitch; Driving With Agricultural Machines Attached To The Front Three-Point Hitch; Towing Equipment; Maximum Permissible Load Of The Hitch - Zetor UTILIX HT Series Operator's Manual

Table of Contents

Advertisement

Working and transport position of the front three-point hitch

A
Working position of the front
three-point hitch
B
Transport position of the front
three-point hitch
Changing the position of the draw-bars of the front three-
point hitch:
1. Release and remove the pin (1) from the opening.
2. Lift the arm from position (A) to position (B).
3. Lock the arm by inserting the pin (2) in the opening (2)
and secure the pin.
Only insert the pin in the openings, never check
whether the opening is free with your fingers!

Driving with agricultural machines attached to the front three-point hitch

The maximum permissible speed of the tractor with agricultural machines attached to the front
three-point hitch is 15 km.h
recommend you to lift the lower lifting draw-bars to the transport position.

Towing equipment

Maximum permissible load of the hitch

Hitch type
Lower hitch
Multi-level hitch attachment tail piece 42,8 kN
Warning: All implements mounted on the tractor must be firmly attached and must be in
accordance with the implement manufacturer's instructions. Use only authorized devices.
Warning: The front towing hitch should be used for emergency trailer towing or for towing the
tractor in the yard or in an authorised service centre.
Caution: Never transport partially attached implements, trailers or agricultural machines by
attaching them to the upper link of the three-point hitch. This could cause the tractor to get stuck or
turned over.
Warning: When towing, always secure the hitch pin with a suitable safety pin with a safety clip
to prevent the hitch pin from being pulled out spontaneously. The safety pin must always be
attached to the hitch.
Warning: The maximum permissible hitch load (horizontal and vertical), the maximum
permissible hitch height for road. Use and the maximum trailed load are indicated in the tractor
registration document.
Caution: Do not allow another person to ride on the drawbars or the lower links when the
tractor is in motion.
72
CONTROLS, INSTRUMENTS & OPERATIONS
-1
. If no implement or weight is attached to the front three-point hitch, we
Maximum draft force
(dynamic load)
29,4 kN
PCLPN062
Maximum permissible vertical
load
500 kg
1,200 kg

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Utilix ht 45Utilix ht 55

Table of Contents