Siemens SINUMERIK 840Di sl Function Manual page 175

12/2008
Function
Condition monitor:
Perform axis tests from
the maintenance job
View maintenance job
The same maintenance job information is shown on both the machine HMI and the
PC. To this effect, menu operation is limited: The jobs cannot be edited; but only
opened and acknowledged, and comments can be added.
Fig. 4-3: Processing a maintenance job on the HMI
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Description
The maintenance personnel can perform the axis
tests that are linked to the maintenance job via the
maintenance schedule.
The maintenance personnel can display the
information stored in the maintenance schedule (from
which the maintenance job was generated), such as
work instructions and attached files (drawings,
extracts from the machine documentation, etc.).
These documents must have been stored as PDF
documents during the planning in the maintenance
schedule or in the job.
4 Organizational tasks
4.1 Maintenance
4-175