Siemens SINUMERIK 840Di sl Function Manual page 224

6 Management
6.1 Organization management
Field
Software
version
• Remote
access
Always request
approval
• Measurements
Display rigidity
Enables
Field
Delete / modify
release
Add release
6-224
Content
Adapting the server software version
of the machine
Notice:
It is only possible to upgrade to a
higher software version. The upgrade
is performed the next time the
machine is booted after the change.
After that it is no longer possible to
undo the change!
If the machine requests remote
access (this is only possible from the
machine), and the location to be
accessed connects to the machine,
access approval must be granted
again on the machine.
Where remote access is concerned,
a distinction is still drawn between
the different actions (visualization
and operation; retrieving data; saving
data; NC operation; PLC access) that
must be acknowledged in a session
as having approval.
Here you can define whether the
rigidity is also to be displayed for the
axis test.
Content
Remove the release of a machine to
another organization or modify the
release rights.
To ensure that users within other
organizations do not require access to
the whole of your organization, it is
possible to release a machine on an
individual basis in the master data for
another organization.
Organizational data are never released
for partner access. The rights for
machine-related functions are the
same as those within your own
organization for system startup
engineers, service engineers, or
machine operators.
ePS Network Services, Function Manual (FH) - Release 12/2008
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
DISPLAY
SELECTION
Type
ACTION
ACTION
© Siemens AG 2008 All Rights Reserved
12/2008