Siemens SINUMERIK 840Di sl Function Manual page 63

12/2008
•
Changing work instructions:
•
Changing execution time:
•
Editing comments:
•
Acknowledging jobs:
•
Deleting jobs:
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
If other tasks that were not known at the time
of planning must be completed along with
those specified in the maintenance schedule
If you change the work instruction, please
note that this is only valid for the selected
maintenance job. Any necessary
modifications to the underlying maintenance
schedule must be made via the "Set up
function" menu "Maintenance schedules".
Editing maintenance jobs is only possible for
new jobs that are not due, open or closed.
E.g. scheduling tasks that can or should be
performed together for the same day
Editing maintenance jobs is only possible for
new jobs that are not due, open or closed.
Adding comments for the tasks that have
been performed or have not been performed;
attaching detailed service report files to the
job
Editing comments is only possible for new
jobs that are not due, open or closed.
The maintenance procedures carried out are
acknowledged as OK or Not OK and then
closed.
Jobs can be deleted in their entirety.
This does not affect the underlying
maintenance schedules and control
mechanisms.
Deleting maintenance jobs is only possible
for new jobs that are not due, open or
closed.
2 Maschine information
2.4 Maintenance
2-63