Siemens SINUMERIK 840Di sl Function Manual page 84

3 Setting up functions
3.1 Maintenance
Field
Responsible org.
Number of lines
Work instruction
Link test series
Automatically
executing a test series
Link measurement
series
Add file
Notice
Changes to maintenance schedules are not applied to pending maintenance jobs.
Changes to maintenance schedules are applied to all maintenance jobs that are
not yet due at the time they become due.
3-84
Content
Organization allocated to carry out
the job in this schedule.
Note:
This information is added to the jobs
from this schedule. However, any
organization with access to this
machine can change or delete the
jobs in this schedule.
The number in the display indicates
the number of lines per screen that
can be shown in this menu. You can
select up to 200 lines. A scroll bar will
then be displayed on the screen.
Explanatory description of the
maintenance task
Selection of a test series to be
carried out in the framework of the
maintenance job.
Time when the maintenance job is to
be performed
Selection of the "series of
measurements" condition monitor in
which the result of the measurement
is updated as part of a maintenance
job.
Note:
Only one series of measurements
can be selected from the series of
measurements available on the
machine.
To provide more details about the
task, documents with more
information can be appended.
Note:
The machine operator at the operator
panel can only view documents in
PDF format.
ePS Network Services, Function Manual (FH) - Release 12/2008
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
(4 to 20)
DISPLAY
INPUT
SELECTION
SELECTION
SELECTION
DISPLAY
ACTION
© Siemens AG 2008 All Rights Reserved
12/2008