Siemens SINUMERIK 840Di sl Function Manual page 200

5 Statistics/export
5.1 Multi-machine views
Fig. 5-10: Overview on the measurement series groups
The measurement series is selected by clicking the "Open" icon in the
corresponding line.
Fig. 5-11: Comparing measurement series in the selected measurement series group
In an overview, the system shows all measurement series examined in one
comparison grouped by machines. In this overview, the selection of the
measurement series to be examined in the comparison function can be changed.
The system will make a preselection, to the effect that from each machine only one
measurement series will be considered for displaying. The criteria for this
preselection is the number of measurements contained in the measurement series.
For each machine, the measurement series with the most measurements will be
marked as selected. By selecting, this preselection can be overwritten at will.
5-200
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
12/2008