Siemens SINUMERIK 840Di sl Function Manual page 123

12/2008
Field
Calendar field
Starting time
Common start date
Next tripping ope-
ration
Interval
alternatively
- all
- weekly
- monthly
all
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Content
When you select the calendar field,
the calendar opens to display the
current month.
You can navigate through the months
in the calendar via the arrows. Select
a number to use the date as the start
date.
The date is limited to 24 months in
the future and 24 months in the past.
If participation in common start date
is selected, you cannot make any
entries here.
The starting time for the trigger can
be specified in hours and minutes.
If no entry is made, the current time is
used.
If participation in common start date
is selected, the time is automatically
set.
Even if the common start date is
subsequently changed, it is
automatically corrected.
The start date can only be selected if
trigger participates in common start
date is deselected.
The next operation is displayed with
date and time so the trigger tripping
time can be checked.
Content
The type of interval must be clearly
selected. You can only select one of
the three options.
Enter a cycle 'n' in the selected time
unit
- Minutes or
- Hours or
- Days
The intervals that can be selected are
restricted to one or more days of the
week, Monday to Friday and a time
window for the selected days of the
week.
The interval runs regardless of the
deselect restriction.
At the end of the interval, the trigger
will be activated in the selected time
3 Setting up functions
3.4 Fault services
Type
SELECTION
DISPLAY
INPUT
(Time format with
leading zeros)
DISPLAY
SELECTION
(Toggle)
DISPLAY
Type
DISPLAY
SELECTION
(Toggle)
DISPLAY
INPUT
SELECTION
(1 to 99,999
minutes or hours)
3-123