Siemens SINUMERIK 840Di sl Function Manual page 199

12/2008
Fig. 5-9: Selecting the machines via the machine tree
The number of machines selected via the machine tree can be limited through a
filter. The filter entry box allows the entry of one or several texts. The filter has the
effect that from all the machines selected via the machine tree, only those will be
considered for the comparison, whose machine name contains one of the filter
texts.
Selection of measurement series
After having selected the machines to be considered, the system will create an
overview over the comparable measurement series. This overview contains the
following information:
•
Type of measurement series
•
Name of measured axis
•
Values of the measurement series parameter relevant for the comparison
•
Number of machines that have a comparable measurement series
•
List of names of the measurement series (names of measurement series that
have the same name for different machines will only be displayed once)
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
5 Statistics/export
5.1 Multi-machine views
5-199