A-29 Zoning Database Limits - Qlogic SANbox 5602 User Manual

A – Command Line Interface
Zoning Command
history
Displays a history of zoning modifications. This keyword does not require an
Admin session. History information includes the following:
Time of the most recent zone set activation or deactivation and the user who
performed it
Time of the most recent modifications to the zoning database and the user
who made them.
Checksum for the zoning database
limits
Displays the number of zone sets, zones, aliases, members per zone, members
per alias, and total members in the zoning database. This keyword also displays
the switch zoning database limits, excluding the active zone set, which are
described in
MaxZoneSets
MaxZones
MaxAliases
MaxTotalMembers
MaxZonesInZoneSets
MaxMembersPerZone
MaxMembersPerAlias
list
Lists all zoning definitions. This keyword does not require an Admin session.
restore
Reverts the changes to the zoning database that have been made during the
current Zoning Edit session since the last Zoning Save command was entered.
save
Saves changes made during the current Zoning Edit session. The system informs
you that the zone set must be activated to implement any changes. This does not
apply if you entered the Zoning Clear command during the Zoning Edit session.
A-134
Table A-29. This keyword does not require an Admin session.
Table A-29. Zoning Database Limits
Limit
Maximum number of zone sets (256)
Maximum number of zones (2000)
Maximum number of aliases (2500)
Maximum number of zone and alias members (10000)
that can be stored in the switch's zoning database.
Maximum number of zones that are components of zone
sets (2000), excluding those in the orphan zone set, that
can be stored in the switch's zoning database. Each
instance of a zone in a zone set counts toward this
maximum.
Maximum number of members in a zone (2000)
Maximum number of members in an alias (2000)
Description
59097-01 A
0