Help Command - Qlogic SANbox 5602 User Manual

A – Command Line Interface

Help Command

Help Command
Displays a brief description of the specified command, its keywords, and usage.
Authority
None
Syntax
help [command] [keyword]
Keywords
[command]
Displays a summary of the command given by [command] and its keywords. If you
omit [command], the system displays all available commands.
[keyword]
Displays a summary of the keyword given by [keyword] belonging to the
command given by [command]. If you omit [keyword], the system displays the
available keywords for the specified command.
all
Displays a list of all available commands (including command variations).
Examples
The following is an example of the Help Config command:
SANbox Manager #> help config
config CONFIG_OPTIONS
The config command operates on configurations.
Usage: config
The following is an example of the Help Config Edit command:
SANbox Manager #> help config edit
config edit [CONFIG_NAME]
This command initiates a configuration session and places the current session
into config edit mode.
If CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets
created.
Admin mode is required for this command.
Usage: config edit [CONFIG_NAME]
A-34
{ activate | backup
edit | list
If it is not given, the currently active configuration is edited.
| cancel | copy | delete
| restore | save }
0
|
59097-01 A