Qlogic SANbox 5602 User Manual page 25

0
b.
11. Open the tar file and save the
SANsurferSwitchMgr_QLGCsol_5.00.xx.bin file in a folder and make the
file executable.
12. Install the new SANsurfer Switch Manager package:
13. Change directories to the package location:
14. Locate and execute the file sbm_over_sms.sh:
15. When prompted for the SMS installation directory, enter d if SMS was
installed in it's default directory (/opt/QLogic_Corporation/SANsurfer).
Otherwise, enter the path name for the SMS installation directory. The script
will copy the necessary files to the specified installation directory.
16. Restart SANsurfer Switch Manager from SANsurfer Management suite as
you did in
59097-01 A
If the release version number (5.00.xx) is greater than what is currently
installed on your workstation, down load the new version. Otherwise,
no upgrade is needed.
# chmod +x sansurferswitchmgr_QLGCsol_5.00.xx
# pkgadd -d sansurferswitchmgr_QLGCsol_5.00.xx
# cd /usr/opt/QLGCsol/bin
# ./sbm_over_sms.sh
step 9 and confirm that the new version is running.
2 – Using SANsurfer Switch Manager
Installing the Management Application
2-9