Qlogic SANbox 5602 User Manual page 189

0
Examples
The following is an example of the CIMSubscription Create command:
SANbox Manager (admin-cim) #> cimsubscription create subscription_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
FilterID values:
Name
FilterID
EnabledState
Duration
Finished configuring attributes.
This configuration must be saved with the cim save command
before it can take effect, or to discard this configuration
use the cim cancel command.
59097-01 A
1 = Create:ComputerSystem
2 = Modify:ComputerSystem
3 = Delete:ComputerSystem
4 = Create:FCPort
5 = Modify:FCPort
6 = Delete:FCPort
subscription_1
(see allowed options above)
(True / False)
(decimal value, 0-720000 secs, 0=forever) [0
A – Command Line Interface
CIMSubscription Command
[Create:ComputerSystem]
[True
A-15
]
]