Qlogic SANbox 5602 User Manual page 115

0
FDMI Enable
Number of Donor Groups
Embedded GUI
Inactivity Timeout
GUI Mgmt Enabled
Telnet Enabled
SSH Enabled
SSL Enabled
CIM Enabled
FTP Enabled
Management Server
Enabled
59097-01 A
Table 4-2. Switch Data Window Entries (Continued)
Entry
Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management
Server functions. SANsurfer Switch Manager will report
any and all FDMI information reported by the entry switch,
if FDMI is enabled on the entry switch. Refer to
"Displaying Detailed Device Information" on page 3-35
information about displaying FDMI information.
Total number of donor port groups. A donor group is a set
of (1-Gbps/2-Gbps only) ports on a switch that can donate
buffer credits to each other.
SANsurfer Switch Manager web applet status. Enables or
disables the web applet on the switch.
Number of minutes the switch waits before terminating an
idle command line interface session. Zero (0) disables the
time out threshold.
Switch management application status. If disabled, the
switch cannot be managed using the application.
Telnet client status
Secure Shell status. If enabled, an encrypted data path is
provided for command line interface sessions.
Secure Sockets Layer status. If enabled, encryption for
switch management application and CIM sessions is
provided.
Common Information Model status. The CIM agent is
based on the SNIA Storage Management Initiative
Specification (SMI-S), which is the standard for SAN
management in a heterogeneous environment.
FTP status
Management server status.
4 – Managing Switches
Displaying Switch Information
Description
for
4-11