Switch Administrative States - Qlogic SANbox 5602 User Manual

4 – Managing Switches
Configuring a Switch
4.7.2.2

Switch Administrative States

The switch administrative state determines the operational state of the switch. The
switch administrative state exists in two forms: the configured administrative state
and the current administrative state.
The configured administrative state is the state that is saved in the switch
configuration and is preserved across switch resets. SANsurfer Switch
Manager always makes changes to the configured administrative state. The
configured administrative state is displayed in the Switch Properties dialog.
The current administrative state is the state that is applied to the switch for
temporary purposes and is not retained across switch resets. The current
administrative state is set using the Set Switch command. Refer to the
Command" on page
Table 4-4
Parameter
Online
Offline
Diagnostics
4-20
A-59.
describes the administrative state values.
Table 4-4. Switch Administrative States
The switch is available.
The switch is unavailable.
The switch is in diagnostics mode, is unavailable, and tests can
then be run on all ports of the switch.
Description
0
"Set
59097-01 A