Qlogic SANbox 5602 User Manual page 23

0
10. To ensure that you are using the most recent version of SANsurfer Switch
Manager, visit the QLogic support web page and go to
Manuals.
a.
b.
11. From the tar.gz file, extract the SANsurferSwitchMgr_Linux_5.00.xx.bin
file and make the file executable.
12. Execute the install program and follow the installation instructions.
13. When prompted for an installation directory, click the Choose button and
select the same folder as the SANsurfer Management Suite installation in
step
/opt/QLogic_Corporation/SANsurfer.
14. Enter the following script command from the installation directory:
15. Start SANsurfer Switch Manager from SANsurfer Management suite as you
did in
59097-01 A
Select your switch model from the pull-down menu. Locate the
description for SANsurfer Switch Manager for Linux under
"Management Software".
If the release version number (5.00.xx) is greater than what is currently
installed on your workstation, down load the new version and proceed
to step 11. Otherwise, no upgrade is needed and the SMS installation
is complete.
chmod +x sansurferswitchmgr_linux_5.02.xx.bin
./sansurferswitchmgr_linux_5.02.xx.bin
9. The default SMS installation directory is
./chglax
step 9 and confirm that the new version is running.
2 – Using SANsurfer Switch Manager
Installing the Management Application
Drivers, Software and
2-7