Qlogic SANbox 5602 User Manual page 113

0
PROM/Boot Version
MAC Address
IP Address
Subnet Mask
Gateway
SNMP Enabled
Negotiated Domain ID
Configured Domain ID
Domain ID Lock
Number of Ports
Operational State
Administrative State
Configured Admin State
R_A_TOV
E_D_TOV
Interop Mode
Legacy Address Format
Interop
59097-01 A
Table 4-2. Switch Data Window Entries (Continued)
Entry
PROM boot version
Media Access Control address
Internet Protocol address
Mask that determines the IP address subnet
Gateway address
SNMP enabled or disabled.
The domain ID currently being used by the fabric
The domain ID defined by network administrator
Domain ID lock status. Prevents (True) or permits (False)
dynamic domain ID reassignment.
Number of ports activated on the switch.
Switch operational state: Online, Offline, Diagnostic,
Down
Current switch administrative state
Switch administrative state that is stored in the switch
configuration
Resource allocation timeout value
Error detect timeout value
Zoning merge status. When a zone set is activated on an
FC-SW-2 compliant switch, only the active zone set is
propagated to all switches in the fabric. When a zone set
is activated on a non-FC-SW-2 compliant switch, the
active zone set and all inactive zone sets (the entire
zoning database) are stored in permanent memory. The
Interop Mode setting must be the same on all switches in
the fabric, otherwise the inter-switch links will not connect.
Legacy port addressing status. Enabled only for
interoperability with non-FC-SW-2 compliant switches.
Zoning auto save status. Saves zoning updates in
Auto Save
temporary memory and the zoning database (True) or
only in temporary memory (False).
4 – Managing Switches
Displaying Switch Information
Description
4-9