Save Default Performance View File Dialog; Load Default View File Dialog - Qlogic SANbox 5602 User Manual

5 – Managing Ports
Graphing Port Performance
in Figure
performance view file. Refer to
Encryption Key" on page 5-21
encryption key.
In the Save Default Performance View File dialog, enter an encryption key in the
Default Performance File Encryption Key field. Re-enter the encryption key in the
Re-enter Encryption Key to Confirm field. Click the OK button to save the current
set of fabrics to the default performance view file in the working directory.
To prevent SANsurfer Performance Viewer from prompting you to save the default
performance view file between sessions, set the Auto Load and Save Graphing
Environment setting to Enable (default). Refer to
Viewer Preferences" on page 5-22
Figure 5-6. Save Default Performance View File Dialog
In your next SANsurfer Performance Viewer session, the Load Default View File
dialog shown in
and to specify its encryption key, if there is one. In the Default Fabric File
Encryption Key field, enter the encryption key and click the Load View File
button. If you do not want to load the default performance view file, click the
Continue Without Loading button to open the SANsurfer Performance Viewer
with no fabric displayed.
5-20
5-6, prompts you to save the current performance view file as the default
for information about defining and changing this
Figure 5-7 prompts you to load the default performance view file
Figure 5-7. Load Default View File Dialog
"Changing the Default Performance View File
"Setting SANsurfer Performance
for more information.
0
59097-01 A