Qlogic SANbox 5602 User Manual page 187

0
Examples
The following is an example of the CIMListener Create command:
SB5602-91.54 (admin-cim) #> cimlistener create listener_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Name
Type
URL
Finished configuring attributes.
This configuration must be saved with the cim save command
before it can take effect, or to discard this configuration
use the cim cancel command.
59097-01 A
listener_1
(2=Permanent, 3=Transient)
(IP address:port format)
A – Command Line Interface
[Permanent ]
[10.0.0.1:5000]
CIMListener Command
A-13