Qlogic SANbox 5602 User Manual page 205

0
Examples
The following is an example of the Group Add command:
SANbox Manager (admin-security) #> group add Group_1
A list of attributes with formatting and default values will follow
Enter a new value or simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name
Group Type
Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret (40 hex or 20 ASCII char value)
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.
The following is an example of the Group Edit command:
SANbox Manager (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name
Group Type
Group Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.
59097-01 A
Group_1
ISL
(WWN)
(None / Chap)
(MD5 / SHA-1)
(32 hex or 16 ASCII char value)
(MD5 / SHA-1 / None)
(domain ID 1-239, 0=None)
g1
ISL
10:00:00:c0:dd:00:90:a3
(None / Chap)
(MD5 / SHA-1)
(40 hex or 20 ASCII char value) [
(MD5 / SHA-1 / None)
(32 hex or 16 ASCII char value) [
(domain ID 1-239, 0=None)
A – Command Line Interface
Group Command
[00:00:00:00:00:00:00:00]
[None
[MD5
[
[None
[
[0
[None] chap
[MD5 ] sha-1
] 12345678901234567890
[None] md5
] 1234567890123456
[3 ]
]
]
]
]
]
]
A-31