A – Command Line Interface
Show Command
BeaconOnStatus
OperationalState
PrincipalSwitchRole
BoardTemp (1) - Degrees Celsius
SwitchDiagnosticsStatus
SwitchTemperatureStatus
timezone
Displays the current time zone setting.
topology
Displays all connected devices.
users
Displays a list of logged-in users. This is equivalent to the User List command.
version
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the About keyword.
Examples
The following is an example of the Show Chassis command:
SANbox Manager #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius
FanStatus (1)
FanStatus (2)
FanDirection (1)
FanDirection (2)
PowerSupplyStatus (1)
PowerSupplyStatus (2)
HeartBeatCode
HeartBeatStatus
A-98
Table A-28. Switch Operational Parameters (Continued)
Parameter
Description
Beacon status as set by the Set Beacon
command.
Switch operational state
Principal switch status. True indicates that
this switch is the principal switch.
Internal switch temperature at circuit board
sensor 1
Results of the power-on self test
Switch temperature status: normal,
warning, failure
36
Good
Good
BackToFront
BackToFront
Good
Good
1
Normal
0
59097-01 A