Resetting A Port; Designate Donor Ports - Qlogic SANbox 5602 User Manual

0
3. Designate Donor Ports: Select available ports and click >> to move the port
into the Selected Donor Port column shown in
of ports needed with the number of designated donor ports. Click the Next
button.
4. Verify Requested Changes: Review the extended distance requests and the
selected donor ports. Click the Finish button to apply the changes, and
redistribute the credits.
Note:
5.4

Resetting a Port

The Reset Port option reinitializes the port using the saved configuration. To reset
a port, do the following:
1. In the faceplate display, select the port(s) to be reset.
2. Open the Port menu and select Reset Port.
59097-01 A
Figure 5-3. Designate Donor Ports
As credits are used, the Logged-In LEDs on the corresponding donor
ports illuminate continuously. In addition, donor port Activity LEDs will
reflect the same traffic as the recipient port. Donor ports whose credits
are being used are unavailable to devices that are connected to them.
5 – Managing Ports
Resetting a Port
Figure 5-3. Match the number
5-15