Qlogic SANbox 5602 User Manual page 254

A – Command Line Interface
Set Port Command
state [state]
Specifies one of the following administrative states for the specified port:
Online
Places the port online. This activates and prepares the port to send data.
Offline
Places the port offline. This prevents the port from receiving signal and
accepting a device login.
Diagnostics
Prepares the port for testing. This prepares the port for testing and prevents
the port from accepting a device login.
Down
Disables the port by removing power from the port lasers.
A-80
0
59097-01 A