Qlogic SANbox 5602 User Manual page 264

A – Command Line Interface
Set Setup Command
The following is an example of the Set Setup System command:
SANbox Manager (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Eth0NetworkDiscovery
Eth0NetworkAddress
Eth0NetworkMask
Eth0GatewayAddress
AdminTimeout
InactivityTimeout
LocalLogEnabled
RemoteLogEnabled
RemoteLogHostAddress
NTPClientEnabled
NTPServerAddress
EmbeddedGUIEnabled
A-90
(1=Static, 2=Bootp, 3=Dhcp, 4=Rarp)
(dot-notated IP Address)
(dot-notated IP Address)
(dot-notated IP Address)
(dec value 0-1440 minutes, 0=never)
(dec value 0-1440 minutes, 0=never)
(True / False)
(True / False)
(dot-notated IP Address)
(True / False)
(dot-notated IP Address)
(True / False)
0
[Static ]
[10.0.0.1 ]
[255.255.255.0]
[10.0.0.254 ]
[30 ]
[0 ]
[True ]
[False ]
[10.0.0.254 ]
[False ]
[10.0.0.254 ]
[True ]
59097-01 A