Ricoh MP 7503SP Field Service Manual page 1425

SC863-17 D
SC863-18 D
HDD data read failure 18
The data written to the HDD cannot be read normally.
Bad sectors were generated during operation.
(An error occurred in partition "p".)
If one or more of the following problems persist, the HDD may be
defective:
• This SC code has occurred ten times or more at short intervals.
• This SC occurred repeatedly at the same time (power-on, etc.).
• Startup takes too long (20 sec. or longer) when the main power is
turned on. Normal HDD access time after main power on is about 5
seconds.
• HDD-related SCs such as SC860* and SC863*. Print and check
the SC logs.
• Replace the HDD
HDD data read failure 19
The data written to the HDD cannot be read normally.
Bad sectors were generated during operation.
(An error occurred in partition "q".)
If one or more of the following problems persist, the HDD may be
defective:
• This SC code has occurred ten times or more at short intervals.
• This SC occurred repeatedly at the same time (power-on, etc.).
• Startup takes too long (20 sec. or longer) when the main power is
turned on. Normal HDD access time after main power on is about 5
seconds.
• HDD-related SCs such as SC860* and SC863*. Print and check
the SC logs.
• Replace the HDD
SC800: Overall System
CTL
CTL
1423