Switch Timer; Ip Configuration - Keysight Technologies N9340B User Manual

• Backlight
The analyzer turns off the backlight of the LCD screen
after a user-defined idle time. Press any key to
re-activate the backlight after the backlight
power-saving mode has been triggered.
• LCD
The analyzer turns off the LCD display after a
user-defined idle time. Press any key to re-activate
the LCD display after the LCD display power-saving
mode has been triggered.
• All - Backlight & LCD
The analyzer turns off the both the LCD display and
the backlight after a user-defined idle time. Press any
key to re-activate the backlight and LCD display after
the backlight and LCD power-saving mode has been
triggered.
Pressing [Preset] for more than 1 second will turn off the LCD dis-
NO TE
play for power saving. Press any key will turn on the display
immediately.

Switch Timer

Pressing [SYS] > {Switch Timer} > {Timer} sets the time
switch to power on/off the N9340B in a user-defined
time and date. This switch timer function requires the
power supply connected or charged battery installed.
Press {Repeat Mode Everyday} to set the N9340B boot
up/off in the pre-saved time everyday. The pre-saved
date is invalid in this mode.

IP configuration

The N9340B supports LAN port connection for data
transfer. Press [SYS] > {Setting} > {IP Admin} > {IP
Address Static} to manually set the IP address, gateway
and subnet mask with the proper LAN information, or
just press [SYS] > {Setting} > {IP Admin} > {IP Address
DCHP} to get the IP address in LAN dynamically
according DCHP.
Press {Apply} to enable all the configurations you set.
System and File
System Setting
27