Keysight Technologies N9340B User Manual page 103

Key Reference
Marker
Peak Search
Place a marker on the highest peak based on the setting
of the Search Criteria as follows:
• Peak
Key access: [MARKER] > {Peak Search}
Place a marker on the highest peak.
• Next Left Peak
Key access: [MARKER] > {Peak Search} > {Next Left PK}
Moves the marker to the next peak to the left of the
current marker. The signal peak must exceed the peak
threshold value by the peak excursion value. If there is
no peak to the right, the marker will not move and the
No Peak Found error message will appear on the display.
• Next Right Peak
Moves the marker to the next peak to the right of the
current marker. The signal peak must exceed the peak
threshold value by the peak excursion value. If there is
no peak to the right, the marker will not move and the
No Peak Found error message will appear on the display.
Key access: [MARKER] > {Peak Search} > {Next Right PK}
• 6 Peaks Search
In non-zero span, pressing 6 Peaks Search turns all six
markers on and puts them on the six highest peak in the
current frequency span.
In zero span, the function is not available.
Key access: [MARKER] > {Peak Search} > {Auto Search}
97