Keysight Technologies N9340B User Manual page 123

• Resolution
Access the associated Resolution submenu.
When the measurement suffix is W or %, this parame-
ter represents the number of significant digits. When
the measurement suffix is dB or dBm, 1 through 4
represents 1, 0.1, 0.01, and 0.001 dB respectively.
The default value is 3.
• Disp Mode
Change the display mode between Meter and Chart.
The default mode is Meter.
• Chart View
Access the Chart View submenu. This soft key is dis-
abled when the measurement is in process or if the
display mode is set to Meter.
This submenu is used to view the measurement chart.
• Home
View the first 21 points of current measurement chart.
• End
View the lastest 21 points of current measurement
chart.
• Prev
View the previous points of the chart.
• Next
View the next points of the chart.
• Continue/Pause
Continues or pauses the current measurement. When
the measurement is in process, this softkey is
displayed as "Pause"; when the measurement is
paused, the softkey is displayed as "Continue".
Key Reference
MODE
117